SHEAR BEHAVIOUR OF LIME-PRESS MUD STABILIZED CLAYS

KOA, DIGNA DIVA (2017) SHEAR BEHAVIOUR OF LIME-PRESS MUD STABILIZED CLAYS. S1 thesis, UAJY.

[img] Text (Halaman Judul)
TS148630.pdf

Download (5Mb)
[img] Text (Bab I)
TS148631.pdf

Download (306Kb)
[img] Text (Bab II)
TS148632.pdf

Download (824Kb)
[img] Text (Bab III)
TS148633.pdf

Download (738Kb)
[img] Text (Bab IV)
TS148634.pdf
Restricted to Registered users only

Download (663Kb)
[img] Text (Bab V)
TS148635.pdf
Restricted to Registered users only

Download (1328Kb)
[img] Text (Bab VI)
TS148636.pdf

Download (33Mb)

Abstract

In Indonesia the existence of clays becomes problems in construction project area such as for infrastructure development. Soil improvement for problematic soil is required especially for construction project area, because commonly the soil characterized by low strength and high compressibility. On the other hand, considering about environmental issue. Nevertheless, the utilization of press mud from sugarcane waste as a stabilizer is limited in engineering practice. Whereas, press mud can be used as alternative for soil stabilizer in soil improvement. This study was to investigate shear strength of lime-press mud stabilize clays. The first step was to obtain the optimum lime content by doing liquid limit test, plastic limit test and plasticity index determination. The soil mixed with thedditives of 2%, 4%, 6%, and 8% lime content. The optimum lime content obtained when the lime has big effects in reducing the plasticity index of soil. In the second step, the optimum lime content was used to make the specimens with addition of press mud with variations 10%, 15% and 20% for direct shear test. These experimental results showed that the optimum lime content was 6%, with the decrement of plasticity index value from 24.24% become 15.77%. Soil specimens that mixed with 2%, 4%, 6%, 8% lime, shows there were increment of ohesion (c) value in 7 and 14 days curing time and increment of friction angle () value in 14 and 28 days curing time. The specimens with optimum lime content 6% mixed with 10%, 15%, 20%, shows there were increment of cohesion (c) value and increment of friction angle () value with 7 and 14 days curing time press mud. The specimen with 6% lime and 20% press mud were the most at improving the shear strength of soil about 0.4447 kg/cm2. It increases about 59.32% of original soil shear strength in 28 days. On the other hand, the additional of lime-press mud into the mixture increases the shear strength with required curing time periods.

Item Type: Thesis (S1)
Uncontrolled Keywords: Plasticity Index, Lime, Press Mud, Cohesion, Friction Angle, Shear Strength, Direct Shear Test
Subjects: Civil Engineering > Structure
Divisions: Fakultas Teknik > Teknik Sipil Internasional
Depositing User: Editor UAJY
Date Deposited: 09 May 2017 07:47
Last Modified: 09 May 2017 07:51
URI: http://e-journal.uajy.ac.id/id/eprint/11705

Actions (login required)

View Item View Item