PERANCANGAN UNTUK MENENTUKAN SETING PARAMETER OPTIMUM PADA PROSES PEMBUATAN PRODUK ROLL

ANGGORO, P. WISNU (2012) PERANCANGAN UNTUK MENENTUKAN SETING PARAMETER OPTIMUM PADA PROSES PEMBUATAN PRODUK ROLL. Media Statistika, 5 (1). pp. 105-118. ISSN lssN 1979-3693

Preview

Text (Paulus Wisnu Anggoro) No.28.pdf Download (869kB) | Preview

Abstract

Design of Experiment (DOE) is the design of any information gathering exercise where variation is preset, whether under the full control at the experiment or not. Problem faced by Atmaja Jaya Industry, Klaten is how to produce high quality product with a minimal amount of defective products. Therefore, this study will look at factor that affect the quality of roll 6” TL in order to obtain the best level setting in the production process. This study uses experimental design with the Taguchi method. Factors to be tested in this study is long making liquid metal (factor A), the old foundry (factor B), and total time of casting (factor C). Each factor has three levels so that the use of orthogonal array L9 . From the result of pooling up mean, the best level combination of factors that affect the quality of roll 6”TL is the length of manufacture of liquid metal which set at 100 minutes, the old foundry is set at 5 seconds and the total time of casting that set in 14 minutes. While the result of pooling up SN ratio for the best level combination of factors that affect the quality of production process variants roll 6 “TL which the length of the manufacture of liquid is set at 100 minutes and total time of casing that are set in 14 minutes.

Actions (login required)

View Item